Intel S1200BT Скачать руководство пользователя страница 71

Страница: 71 / 122

Intel® Server Board S1200BT Service Guide

Realtime Temperature and Voltage Status

The Realtime Temperature and Voltage Status screen allows the user to view displays of

current processor and system fan speeds, current system temperature, and the status of

various voltages which are monitored on the board.

This screen is present only for boards without a BMC.

To access this screen from the

Main

screen, select

Server Management

Hardware

Monitor

Realtime Temperature and Voltage Status

. To move to another screen, press

the

<Esc>

key to return to the

Hardware Monitor

screen, if necessary press the

<Esc>

key again to return to the

Server Management

screen, then select the desired screen.

Figure 27. Realtime Teperature and Voltage Status Screen (S1200BTS)

Boot Options Screen (Tab)

The Boot Options screen displays any bootable media encountered during POST, and

allows the user to configure the desired order in which boot devices are to be tried. The

first boot device in the specified Boot Order which is present and bootable during POST

will be used to boot the system any time the system is rebooted after that.

If all types of bootable devices are installed in the system, then the default boot order is as

follows:

CD/DVD-ROM

Floppy Disk Drive

Hard Disk Drive

Содержание S1200BT



























































































































Результаты поиска

Содержание S1200BT

Отзывы:

Intel S1200BT, Руководство по обслуживанию, Страница: 71 / 122

Результаты поиска

Содержание S1200BT

Отзывы: