manualshive.com logo in svg

Intel S1200BT, Руководство по обслуживанию, Страница: 28 / 122

Поделиться
Скачать
Intel S1200BT Скачать руководство пользователя страница 28

12

Intel® Server Board S1200BT Service Guide

Figure 6. Configuration Jumpers Location

Back Panel Connectors

Figure 7. Back Panel Connectors

The NIC LEDs at the right and left of each NIC provide the following information.

J1E2: Protected RTC 
(CMOS clear)

1-2

These pins should have a jumper in place for normal system 
operation. (

Default

)

2-3

If these pins are jumpered, the CMOS settings are cleared on the 
next reset.

Note:

 These pins should not be jumpered for normal operation.

J1F3: BIOS Recovery

1-2

These pins should have a jumper in place for normal system 
operation.(

Default

)

2-3

The main system BIOS will not boot with these pins jumpered.

Note:

 The system will boot from EFI-bootable recovery media with a 

recovery BIOS image.

J1F2: ME Force 
Recovery

1-2

These pins should have a jumper in place for normal system 
operation. (

Default

)

2-3

ME force update model

Jumper Name

Pins 

What happens at system reset…

A.

Serial Port A

C.

NIC Port 1 (1 Gb) and Dual USB Port 
Connector

B.

Video

D.

NIC Port 2 (1 Gb) and Dual USB Port 
Connector

Содержание S1200BT



























































































































Отзывы:

Нет отзывов