Intel R1000WF Series, Руководство по системной интеграции и обслуживанию

Страница: 99 / 125

Intel ® Server System R1000WF Product Family System Integration and Service Guide
83
Note : The <F2> BIOS Setup Utility must be accessed and setting must be set and saved to restore
configuration settings.
7.3 Rack Handles – Installation / Removal
The system includes a set of rack handles designed to secure a system into a rack or cabinet and to aid with
pulling systems from or pushing systems into a rack or cabinet.
Note : The system should never be carried solely by the rack handles. Intel recommends carrying the system
using two people or to use a cart when moving the system from one location to another.
7.3.1 Installing the Rack Handles
Figure 100. Installing the Rack Handle
1. Locate the rack handles.
2. Align the rack handle with the two holes on the side of the server system.
3. Attach the rack handle to the server system with two screws using 8 in-lb. torque.
7.3.2 Removing the Rack Handles
Figure 101. Removing the Rack Handle
Remove the two screws holding the rack handle to the chassis.