Intel PXA270 Скачать руководство пользователя страница 120 | Manualshive

Страница: 120 / 144

background image

6-6

Intel® PXA27x Processor Family

Optimization Guide

Power Optimization

Another way to save power is to reduce memory traffic. Instead of using a color depth of 16-bits

per pixel, systems could use 8-bits per pixel to reduce the memory bandwidth for LCD refresh.

The output drivers for the PXA27x processor LCD data pins have programmable strength settings.

This feature allows for simple, software-based control of the output-driver impedance for the data

pins on the LCD bus. Use these registers to match the driver strength of the PXA27x processor to

LCD bus. The buffer strength should be set to the lowest possible setting (minimum drive strength)
that still allows for reliable bus performance. This minimizes the power usage of the LCD data

pins, which can be a major component of total system power, since in a typical system, these pins

are always driven while the screen is on. Refer to the

“LCD Buffer Strength Control Register

(LCDBSCNTR)”

table in the

Intel® PXA27x Processor Family Developer’s Manual

for more

information.

6.3.6

Voltage and Regulators

The PXA27x processor supports 1.8 V memory. Depending on the memory usage of applications,

there may be significant power savings using 1.8 V SDRAM compared to 2.5 V or 3.3 V SDRAM.

If no other devices in the system use 1.8 V, then users must consider the power savings compared
to the extra components and board real-estate to support 1.8 V.

6.3.7

Operating Mode Recommendations for Power Savings

6.3.7.1

Normal Mode

It may be require less power to run at a higher Intel XScale® core frequency/voltage to complete a

task and then drop the operating frequency and Intel XScale® core voltage than to run at a constant

frequency and voltage. Profile the OS and applications to determine the optimum Intel XScale®
core operating frequency. Use the lowest possible Intel XScale® core voltage to run at the required

frequency.

For lowest power consumption in normal mode:

•

Use Intel® Integrated Performance Primitives

•

Use Wireless Intel Speedstep® Technology

•

Use Intel® Power Manager

•

Use low-power modes when possible

•

Enable both caches

•

Use a caching policy of read allocate/write back when possible

•

Set the APD bit (see

•

Configure the System Memory Buffer Strength Control registers for the minimal setting for

reliable memory bus performance.

•

Configure the LCD Buffer Strength Control register for the minimal setting for reliable LCD

bus performance.

6.3.7.2

Idle Mode

Use idle mode only for brief periods of time when the Intel XScale® core is soon required to

perform calculations.

«
...
118
119
120
121
122
...
»

Содержание PXA270

















































































































































Отзывы:

Нет отзывов

Похожие инструкции для PXA270

Бренд: D-Link Страницы: 38

Web Smart DES-1210-28P

Бренд: D-Link Страницы: 6

xStack Storage DSN-4000 Series

Бренд: D-Link Страницы: 23

Express EtherNetwork DI-604

Бренд: D-Link Страницы: 7

xStack Storage DSN-4000 Series

Бренд: D-Link Страницы: 97

Бренд: Eaton Страницы: 10

Бренд: mikroElektronika Страницы: 3

Бренд: BSS Audio Страницы: 20

Бренд: Reeven Страницы: 2

Бренд: Lancom Страницы: 70

Бренд: XMOS Страницы: 6

Бренд: Waves Страницы: 41

PARTNER PC CARD

Бренд: Avaya Страницы: 4

ELITENAS EN104L+(B)

Бренд: Sans Digital Страницы: 9

Turbo NAS TVS-71 Series

Бренд: QNAP Страницы: 51

Бренд: Longshine Страницы: 35

UM10301 PCA8565

Бренд: NXP Semiconductors Страницы: 54

Slideaway CL1008

Бренд: ATEN Страницы: 77

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды