Intel Omni-Path Director Class Switch Series Скачать руководство пользователя страница 9

Страница: 9 / 91

Preface

This manual is part of the documentation set for the Intel

Omni-Path Fabric (Intel

OP Fabric), which is an end-to-end solution consisting of Intel

Omni-Path Host Fabric

Interfaces (HFIs), Intel

Omni-Path switches, and fabric management and

development tools.

The Intel

OP Fabric delivers the next generation, High-Performance Computing (HPC)

network solution that is designed to cost-effectively meet the growth, density, and

reliability requirements of large-scale HPC clusters.

Both the Intel

OP Fabric and standard InfiniBand* (IB) are able to send Internet

Protocol (IP) traffic over the fabric, or IPoFabric. In this document, however, it may

also be referred to as IP over IB or IPoIB. From a software point of view, IPoFabric

behaves the same way as IPoIB, and in fact uses an ib_ipoib driver to send IP traffic

over the ib0/ib1 ports.

Intended Audience

The intended audience for the Intel

Omni-Path (Intel

OP) document set is network

administrators and other qualified personnel.

Intel

Omni-Path Documentation Library

Intel

Omni-Path publications are available at the following URLs:

•

Intel

Omni-Path Switches Installation, User, and Reference Guides

http://www.intel.com/omnipath/SwitchPublications

•

Intel

Omni-Path Software Installation, User, and Reference Guides (includes HFI

documents)

http://www.intel.com/omnipath/FabricSoftwarePublications

•

Drivers and Software (including Release Notes)

http://www.intel.com/omnipath/Downloads

Use the tasks listed in this table to find the corresponding Intel

Omni-Path

document.

Task

Document Title

Description

Key:
Shading indicates the URL to use for accessing the particular document.

• Intel

Omni-Path Switches Installation, User, and Reference Guides:

http://www.intel.com/omnipath/SwitchPublications

• Intel

Omni-Path Software Installation, User, and Reference Guides (includes HFI documents):

http://www.intel.com/omnipath/FabricSoftwarePublications

(no shading)

• Drivers, Software, and Firmware (including Release Notes):

http://www.intel.com/omnipath/Downloads

continued...

Preface—Intel

Omni-Path Fabric

Intel

Omni-Path Fabric Switches Hardware

June 2019

Installation Guide

Doc. No.: H76456, Rev.: 10.0

Содержание Omni-Path Director Class Switch Series




























































































Результаты поиска

Содержание Omni-Path Director Class Switch Series

Отзывы:

Бренды по названию

Популярные бренды

Intel Omni-Path Director Class Switch Series, Руководство по установке

Результаты поиска

Содержание Omni-Path Director Class Switch Series

Отзывы:

Бренды по названию

Популярные бренды