manualshive.com logo in svg

Intel Omni-Path Director Class Switch Series, Руководство по установке

Поделиться
Скачать
Intel Omni-Path Director Class Switch Series Скачать руководство пользователя страница 69

1. Connect a Category 5 or 6 (Cat 5/6) Ethernet cable to the RJ-45 connector(s) on

the switch. Connect the other end of the Cat 5/6 to an OOB LAN workstation,

another switch or a hub.

2. Connect the switch to host(s)/switch(es) using QSFP cables.

CAUTION

It is important to provide strain relief for the cable connector.

Director Class Switch Port and Slot Numbering

The graphic below details the leaf slot numbering schema for each Director switches.

Note:

Leaf slots 101 and 102 are referred to "Management" slots, meaning a leaf module

must be present whenever a management module is installed in the corresponding

slot on the front of the chassis.

Figure 55.

Director Class Leaf Slot Numbering

2.5.1  

Installation—Intel

®

 Omni-Path Fabric

Intel

®

 Omni-Path Fabric Switches Hardware

June 2019

Installation Guide

Doc. No.: H76456, Rev.: 10.0

69

Содержание Omni-Path Director Class Switch Series




























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды