•
(Switch) – Tasks are applicable only when Intel
®
Omni-Path Switches or Chassis
are being used.
•
Tasks that are generally applicable to all environments are not marked.
Laser Safety Information
This product may use Class 1 laser optical transceivers to communicate over the fiber
optic conductors. The U.S. Department of Health and Human Services (DHHS) does
not consider Class 1 lasers to be hazardous. The International Electrotechnical
Commission (IEC) 825 Laser Safety Standard requires labeling in English, German,
Finnish, and French stating that the product uses Class 1 lasers. Because it is
impractical to label the transceivers, the following label is provided in this manual.
Electrostatic Discharge Sensitivity (ESDS) Precautions
The assemblies used in the switch chassis are ESD sensitive. Observe ESD handling
procedures when handling any assembly used in the switch chassis.
License Agreements
This software is provided under one or more license agreements. Please refer to the
license agreement(s) provided with the software for specific detail. Do not install or
use the software until you have carefully read and agree to the terms and conditions
of the license agreement(s). By loading or using the software, you agree to the terms
of the license agreement(s). If you do not wish to so agree, do not install or use the
software.
Technical Support
Technical support for Intel
®
Omni-Path products is available 24 hours a day, 365 days
a year. Please contact Intel Customer Support or visit
http://www.intel.com/omnipath/
for additional detail.
Preface—Intel
®
Omni-Path Fabric
Intel
®
Omni-Path Fabric Switches Hardware
June 2019
Installation Guide
Doc. No.: H76456, Rev.: 10.0
13
