Intel M50FCP1UR, Руководство пользователя

Страница: 85 / 133

Intel® Server System M50FCP1UR System Integration and Service Guide
85
6.12 Backplane Replacement
Depending on the system configuration, the Intel® Server System M50FCP1UR includes either a 4 x 2.5”
backplane or 12 x 2.5” backplane. This section provides the procedures necessary to replace both types.
6.12.1 4 X 2.5” Backplane Replacement
Required Tools and Supplies
• Intel backplane kit
•
Anti-static wrist strap and conductive anti-static wrist strap and conductive workbench pad
(recommended)
• Phillips* head screwdriver #1
Figure 118. 4 x 2.5” Backplane Removal
1. Power off the system and disconnect the system power cords.
2. Remove the system top cover (see Section 6.1.1 ).
3. Remove all drives and drive blanks from the front drive bays. NOTE: If drives are configured to a RAID
partition, label the drives to identify the drive bay location they were removed from.
4. Disconnect all cables from the backplane. NOTE: If drives are configured to a RAID partition, label
each drive I/O cable to identify the backplane cable connection they were disconnected from.
5. Remove the three screws securing the backplane to drive bay (see Letter A).
6. Lift the backplane up from the chassis base and pull it out from the system (see Letter B).