Intel® Server System M50CYP1UR Family System Integration and Service Guide
91
6.8
System Battery Replacement
Required Tools and Supplies
•
Anti-static wrist strap and conductive workbench pad (recommended)
Figure 110. Replacing the System Battery
1.
Remove the system top cover (see
Section 6.1.1
2.
If present, remove riser card assemblies above the battery location (see
Section 3.2.1
).
3.
Locate the battery on the server board. (see above figure).
4.
Gently press the metal clip as shown to release the battery (see Letter A).
5.
Remove the battery from the plastic socket (see Letter B).
6.
Dispose of the battery according to local laws.
7.
Remove the new lithium battery from its package and, being careful to observe the correct polarity,
insert it into the battery socket.
8.
Reinstall riser card assemblies if needed (see
Section 3.2.2
).
9.
Reinstall the system top cover (see
Section 6.1.2
10.
Use the <F2> BIOS Setup Utility to restore BIOS Settings and reset the system time and date.
