manualshive.com logo in svg

Intel IXP45X, Руководство разработчика

Поделиться
Скачать
Intel IXP45X Скачать руководство пользователя страница 52

Intel

®

 IXP45X and Intel

®

 IXP46X Product Line of Network Processors—Functional Overview

Intel

®

 IXP45X and Intel

®

 IXP46X Product Line of Network Processors

Developer’s Manual

August 2006

52

Reference Number: 306262-004US

Note:

All the described NPE functions require Intel-supplied software executing on the NPEs. 

For further information, see the Intel

®

 IXP400 Software Programmer’s Guide. For 

information on the availability of the NPE software and its enabling functions, contact 

your local sales representative.

2.1.5

Universal Serial Bus (USB) Interfaces

There are two USB interfaces supported by the IXP45X/IXP46X network processors:

• USB 1.1 Device Interface
• USB 2.0 Host Interface

2.1.5.1

USB 1.1 Device Interface

The integrated USB 1.1 device interface supports full-speed operation and 16 endpoints 

and includes an integrated transceiver.

There are:

• Six isochronous endpoints (three input and three output)
• One control endpoints
• Three interrupt endpoints
• Six bulk endpoints (three input and three output)

2.1.5.2

USB 2.0 Host Interface

This unit supplies USB Host functionality. The function being performed is defined by 

the USB 2.0 specification, maintained by usb.org, and the interface is (largely) EHCI-

compliant, as defined by Intel.

Not all features defined by the 2.0 specification are supported for this implementation. 

The following is a partial list of supported features:

• Host function
• Low  speed  interface
• Full speed interface
• EHCI  register  interface

The following is a partial list of features not supported:

• Device function
• OTG function
• High speed interface

2.1.6

PCI Controller

The PCI controller of the IXP45X/IXP46X network processors is compatible with the PCI 

Local Bus Specification, Rev. 2.2. The PCI interface is 66Mhz 32-bit compatible bus and 

capable of operating as either a host or an option.

When the PCI Controller is configured as a host, an internal PCI arbiter may be utilized 

to allow up to four devices to be connected to the IXP45X/IXP46X network processors 

without the need for an external arbiter.

Features of the PCI Controller include:

• Conforms to PCI Local Bus Specification Revision 2.2

Содержание IXP45X































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды