Intel IXP2400 Скачать руководство пользователя страница 29

Страница: 29 / 320

Development Tools User’s Manual

IXP2400/IXP2800 Network Processors

Developer Workbench

Note:

You do not have the option of saving the project in a different folder.

2.3.4

Closing a Project

To close a project:

•

On the

File

menu, click

Close Project

If there are any modified but unsaved files in the opened project, you are asked if you want to
save these changes.

— Click

Yes

to save the file and close it, or

— Click

to close it without saving any changes, or

— Click

Cancel

to abort closing the project.

An open project is automatically closed whenever you open another project or create a new project.

2.3.5

Specifying a Default Project Folder

You can specify a default folder for creating new projects and opening projects. When you select

Default Project Folder

from the

File

menu, the

Browse for folder

dialog box appears. The

default project folder is used as the initial folder in the following cases:

•

If the user selects

New Project

from the

File

menu.

•

If the user selects

Open Project

from the

File

menu.

•

If no project is open and the user creates a new file then selects

Save As

from the

File

menu.

•

If no project is open and the user selects

Open

from the

File

menu.

Содержание IXP2400

































































































































































































































































































































Результаты поиска

Содержание IXP2400

Отзывы:

Intel IXP2400, Руководство пользователя, Страница: 29 / 320

Результаты поиска

Содержание IXP2400

Отзывы: