manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Руководство пользователя, Страница: 582 / 604

Поделиться
Скачать
Intel ITANIUM ARCHITECTURE Скачать руководство пользователя страница 582

Volume 4: IA-32 SSE Instruction Reference

4:575

PSHUFW: Packed Shuffle Word

Operation:

mm1[15-0]   = (mm2/m64 >> (imm8[1-0] * 16) )[15-0]

mm1[31-16]  = (mm2/m64 >> (imm8[3-2] * 16) )[15-0]

mm1[47-32]  = (mm2/m64 >> (imm8[5-4] * 16) )[15-0]

mm1[63-48]  = (mm2/m64 >> (imm8[7-6] * 16) )[15-0]

Description:

The PSHUF instruction uses the imm8 operand to select which of the four words in 
MM2/Mem will be placed in each of the words in MM1. Bits 1 and 0 of imm8 encode the 
source for destination word 0 (MM1[15-0]), bits 3 and 2 encode for word 1, bits 5 and 4 
encode for word 2, and bits 7 and 6 encode for word 3 (MM1[63-48]). Similarly, the two 
bit encoding represents which source word is to be used, e.g. an binary encoding of 10 
indicates that source word 2 (MM2/Mem[47-32]) will be used.

Numeric Exceptions: 

 None.

Protected Mode Exceptions:

#GP(0) for an illegal memory operand effective address in the CS, DS, ES, FS or GS 
segments; #SS(0) for an illegal address in the SS segment; #PF (fault-code) for a page 
fault; #UD if CR0.EM = 1; #NM if TS bit in CR0 is set; #MF if there is a pending FPU 
exception; #AC for unaligned memory reference. To enable #AC exceptions, three 
conditions must be true(CR0.AM is set; EFLAGS.AC is set; current CPL is 3).

Real Address Mode Exceptions:

Interrupt 13 if any part of the operand would lie outside of the effective address space 
from 0 to 0FFFFH;

 

#UD if CR0.EM = 1; #NM if TS bit in CR0 is set; #MF if there is a 

pending FPU exception.

Virtual 8086 Mode  Exceptions:

Same exceptions as in Real Address Mode; #PF(fault-code) for a page fault; #AC for 
unaligned memory reference if the current privilege level is 3.

Additional Itanium System Environment Exceptions

 Itanium Reg Faults Disabled FP Register Fault if PSR.dfl is 1, NaT Register 

Consumption Fault

 Itanium Mem Faults VHPT Data Fault, Data TLB Fault, Alternate Data TLB Fault, Data 

Page Not Present Fault, Data NaT Page Consumption Abort, Data 

Key Miss Fault, Data Key Permission Fault, Data Access Rights 

Fault, Data Access Bit Fault

4.14

Cacheability Control Instructions

This section describes the cacheability control instructions which enable an application 
writer to minimize data access latency and cache pollution.

Opcode

Instruction

Description

0F,70,/r,ib

PSHUFW mm1, mm2/m64, imm8

Shuffle the words in MM2/Mem based on the 
encoding in imm8 and store in MM1.

Содержание ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов