manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Руководство пользователя

Поделиться
Скачать
Intel ITANIUM ARCHITECTURE Скачать руководство пользователя страница 394

Volume 4: Base IA-32 Instruction Reference

4:387

WBINVD—Write-Back and Invalidate Cache

Description

Writes back all modified cache lines in the processor’s internal cache to main memory, 
invalidates (flushes) the internal caches, and issues a special-function bus cycle that 
directs external caches to also write back modified data.

After executing this instruction, the processor does not wait for the external caches to 
complete their write-back and flushing operations before proceeding with instruction 
execution. It is the responsibility of hardware to respond to the cache write-back and 
flush signals.

The WBINVD instruction is a privileged instruction. When the processor is running in 
protected mode, the CPL of a program or procedure must be 0 to execute this 
instruction. This instruction is also a serializing instruction.

In situations where cache coherency with main memory is not a concern, software can 
use the INVD instruction. 

Operation

IF Itanium System Environment THEN IA-32_Intercept(INST,WBINVD);

WriteBack(InternalCaches);
Flush(InternalCaches);
SignalWriteBack(ExternalCaches);
SignalFlush(ExternalCaches);
Continue (* Continue execution);

Flags Affected

None.

Additional Itanium System Environment Exceptions

IA-32_Intercept

Mandatory Instruction Intercept.

Protected Mode Exceptions

#GP(0)

If the current privilege level is not 0.

Real Address Mode Exceptions

None.

Opcode

Instruction

Description

0F 09

WBINVD

Write-back and flush Internal caches; initiate writing-back and 
flushing of external caches.

Содержание ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды