manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3, Руководство пользователя, Страница: 18 / 1898

Поделиться
Скачать
Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3 Скачать руководство пользователя страница 18

Volume 1, Part 1: About this Manual

1:7

Chapter 3, “IA-32 Intel

®

 MMX™ Technology Instruction Reference”

 provides a detailed 

description of all IA-32 Intel

®

 MMX™ technology instructions designed to increase 

performance of multimedia intensive applications. Organized in alphabetical order by 
assembly language mnemonic.

Chapter 4, “IA-32 SSE Instruction Reference”

 provides a detailed description of all 

IA-32 SSE instructions designed to increase performance of multimedia intensive 
applications, and is organized in alphabetical order by assembly language mnemonic.

1.5

Terminology

The following definitions are for terms related to the Itanium architecture and will be 
used throughout this document:

Instruction Set Architecture (ISA) – 

Defines application and system level 

resources. These resources include instructions and registers.

Itanium Architecture

 – The new ISA with 64-bit instruction capabilities, new 

performance- enhancing features, and support for the IA-32 instruction set.

IA-32 Architecture – 

The 32-bit and 16-bit Intel architecture as described in the 

Intel

®

 64 and IA-32 Architectures Software Developer’s Manual

.

Itanium System Environment – 

The operating system environment that supports 

the execution of both IA-32 and Itanium architecture-based code.

Itanium Architecture-based Firmware – 

The Processor Abstraction Layer (PAL) and 

System Abstraction Layer (SAL).

Processor Abstraction Layer (PAL) – 

The firmware layer which abstracts processor 

features that are implementation dependent.

System Abstraction Layer (SAL) – 

The firmware layer which abstracts system 

features that are implementation dependent.

1.6

Related Documents

The following documents can be downloaded at the Intel’s Developer Site at 
http://developer.intel.com:

•

Dual-Core Update to the Intel® Itanium® 2 Processor Reference Manual 
for Software Development and Optimization

– Document number 308065 

provides model-specific information about the dual-core Itanium processors.

•

Intel

®

 Itanium

®

 2 Processor Reference Manual for Software Development 

and Optimization

 

– This document (Document number 251110) describes 

model-specific architectural features incorporated into the Intel

®

 Itanium

®

 2 

processor, the second processor based on the Itanium architecture.

•

Intel

®

 Itanium

®

 Processor Reference Manual for Software Development 

– 

This document (Document number 245320) describes model-specific architectural 
features incorporated into the Intel

®

 Itanium

®

 processor, the first processor based 

on the Itanium architecture.

Содержание ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов