Intel i5-700 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 102

Intel i5-700 Скачать руководство пользователя страница 17

Thermal/Mechanical Specifications and Design Guidelines

17

LGA1156 Socket

3

LGA1156 Socket

This chapter describes a surface mount, LGA (Land Grid Array) socket intended for the
processors. The socket provides I/O, power, and ground contacts. The socket contains
1156 contacts arrayed about a cavity in the center of the socket with lead-free solder
balls for surface mounting on the motherboard.

The contacts are arranged in two opposing L-shaped patterns within the grid array. The
grid array is 40 x 40 with 24 x 16 grid depopulation in the center of the array and
selective depopulation elsewhere.

The socket must be compatible with the package (processor) and the Independent
Loading Mechanism (ILM). The ILM design includes a back plate that is integral to
having a uniform load on the socket solder joints. Socket loading specifications are
listed in

.

Figure 3-1. LGA1156 Socket with Pick and Place Cover

«
...
15
16
17
18
19
...
»

Содержание i5-700







































































































Отзывы:

Нет отзывов