Intel EtherExpress PRO/100+, Руководство по установке

Страница: 22 / 38

18 Intel EtherExpress PRO/100+ TX PCI LAN Controller User’s Guide
2. Modify the lines to match your workstation or server’s requirements.
3. Save the STARTUP.NCF and AUTOEXEC.NCF files and restart your
server.
Deleting a Team
To remove a team in AFT, ALB or FEC mode, edit out the lines above. Or,
temporarily remove the team by issuing the unbind command with the slot
number for the primary controller in the group.
Format:
AFT UNBIND SlotNumber
Example:
AFT UNBIND 7
Setting Up Adaptive Load Balancing
Adaptive Load Balancing (ALB) is a simple and efficient way to increase
your server’s transmit throughput. With ALB you group PRO/100+
adapters in teams to provide an increased transmit rate (up to 400 Mbps)
using a maximum of four adapters. The ALB software continuously
analyzes transmit loading on each adapter and balances the rate across the
adapters as needed. Adapter teams configured for ALB also provide the
benefits of AFT. Receive rates remain at 100 Mbps.
To use ALB, you must have two, three, or four PRO/100+ adapters
configured as a team in your server or workstation and linked to the same
network switch.
Setting up ALB in Windows NT 4.0
1. Double-click the Network icon in the Control Panel.
2. On the Adapters tab, select a PRO/100+ adapter that will be in the
team and click Properties.
3.
Click Adapter Teaming in the PROSet window.
Setting up ALB in Windows NT 4.0
ENet2.book Page 18 Monday, May 4, 1998 9:53 AM