For help with typing commands to your Linux terminal, use Intel
®
IoT Gateway
Development Kit DK100 Series - Getting Started Guide Commands at
downloadcenter.intel.com/Detail_Desc.aspx?
agr=Y&DwnldID=24331&lang=eng&wapkw=dk100
. This text file includes all of the
commands in this Getting Started Guide. The purpose is to provide you with an easy
way to copy and paste commands to your Linux terminal.
Document Conventions
This document uses the following conventions:
•
"Development Kit" refers to the Intel
®
IoT Gateway Development Kit DK100
Series. This term includes the gateway hardware, the board firmware, and the
software from Wind River Systems, Inc.
•
"Target Device" refers to the gateway device onto which you will install Wind
River
®
Intelligent Device Platform XT runtime software.
•
"Host System" refers to a Linux system that you will use to configure your Target
Device. You will install development tools from Wind River Systems, Inc. on this
system. The Host System is not included in this kit.
The examples in this publication use a Host System that has an Intel
®
Core
™
i5
second generation processor and Ubuntu* Desktop 14.04 distribution software. If
you are using a different operating system, substitute the instructions in this
publication with instructions that are appropriate for your system.
•
This font is used for commands, API names, parameters,
filenames, directory paths, and executables.
•
Bold text is used for graphical user interface entries, buttons, and keyboard keys.
This font in a gray box is used for commands or scripts that you must type.
This font in a green box displays responses to your commands.
•
To help you keep track of your progress, illustrations are used at the beginning of
each key task. The following is an example of these illustrations.
— A white background indicates steps you have completed.
— A blue background indicates the step you are about to work on.
— A gray background indicates future steps.
Figure 5.
Sample "You Are Here"
Put Runtime
Software on
Flash Drive
Install Linux
and Wind River
Packages on
Host System
Build Runtime
on Host
System
Update SPI
Firmware on
Target Device
Install Runtime
on Target
Device
Before you
Begin
Connect
Hardware /
Connect Target
Device to Host
System
Connect Target
Device to Host
System
Register
Target Device
Blank line. Do not remove.
Blank line. Do not remove.
Blank line. Do not remove.
Intel IoT Gateway Development Kit DK100 Series —Introduction
Intel
®
IoT Gateway Development Kit DK100 Series
Getting Started Guide
April 2015
14
Order No.: 330307-007
