Intel D945GPM Скачать руководство пользователя | Manualshive

Страница: 54 / 72

background image

Intel Desktop Board D945GPM Product Guide

54

Updating the Iflash BIOS Update Utility

With the Iflash BIOS update utility you can update the system BIOS from a floppy disk or other
bootable media. The utility available from the Web provides a simple method for creating a
bootable flash memory update floppy that will automatically update your BIOS.

Obtaining the BIOS Update File

You can update to a new version of the BIOS by using the BIOS update file. The BIOS update file
is a compressed self-extracting archive that contains all the files you need to update the BIOS. The
BIOS update file contains:

•

New BIOS files

•

BIOS recovery files

•

Intel Flash Memory Update Utility

You can obtain the BIOS update file through your computer supplier or by navigating to the
Desktop Board D945GPM page on the Intel World Wide Web site at:

http://support.intel.com/support/motherboards/desktop

Navigate to the D945GPM page, click “[

view

]

Latest BIOS updates

,”

and

select

the Iflash BIOS

Update utility file.

NOTE

Review the instructions distributed with the update utility before attempting a BIOS update.

The Iflash BIOS Update utility allows you to:

•

Update the BIOS in flash memory

•

Update the language section of the BIOS

Updating the BIOS

CAUTION

The

AUTOEXEC.BAT

file provided with the update files updates the BIOS. Do not interrupt the

process or the system may not function.

1.

Boot the computer with the BIOS update diskette in drive A. During system boot, the
AUTOEXEC.BAT file provided with the update files will automatically run the BIOS update
process.

2.

When the update process is complete, the monitor will display a message telling you to remove
the diskette and to reboot the system.

3.

As the computer boots, check the BIOS identifier (version number) to make sure the update
was successful. If a logo appears, press <Esc> to view the POST messages.

«
...
52
53
54
55
56
...
»

Содержание D945GPM









































































Отзывы:

Нет отзывов

Похожие инструкции для D945GPM

Бренд: Yamaha Страницы: 96

Бренд: SOYO Страницы: 95

Бренд: IBASE Technology Страницы: 56

Бренд: JETWAY Страницы: 52

Бренд: Renesas Страницы: 17

Бренд: Gigabyte Страницы: 36

z170a GAMING M9 ACK

Бренд: MSI Страницы: 109

Бренд: ECS Страницы: 61

Бренд: SELVA MARINE Страницы: 35

Бренд: Liantec Страницы: 4

TLE986 Evalboard Series

Бренд: Infineon Страницы: 20

Бренд: MSI Страницы: 32

Voltage Supervisor SOT23

Бренд: Microchip Technology Страницы: 28

Бренд: MSI Страницы: 106

Thunder HEsl S2567

Бренд: TYAN Страницы: 60

Бренд: IEI Technology Страницы: 12

Бренд: Icop Страницы: 41

Бренд: JETWAY Страницы: 51

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды