Intel Core2 Extreme QX9000 Series страница 88 Скачать руководство пользователя

Страница: 88 / 104

Features

Datasheet

6.2.1

Normal State

This is the normal operating state for the processor.

6.2.2

HALT and Extended HALT Powerdown States

The processor supports the HALT or Extended HALT powerdown state. The Extended

HALT Powerdown state must be configured and enabled via the BIOS for the processor

to remain within specification.

The Extended HALT state is a lower power state as compared to the Stop Grant State.

If Extended HALT is not enabled, the default Powerdown state entered will be HALT.

Refer to the sections below for details about the HALT and Extended HALT states.

6.2.2.1

HALT Powerdown State

HALT is a low power state entered when all the processor cores have executed the HALT

or MWAIT instructions. When one of the processor cores executes the HALT instruction,

that processor core is halted, however, the other processor continues normal operation.

The halted core will transition to the Normal state upon the occurrence of SMI#, INIT#,

or LINT[1:0] (NMI, INTR). RESET# will cause the processor to immediately initialize

itself.

The return from a System Management Interrupt (SMI) handler can be to either

Normal Mode or the HALT Power Down state. See the

Intel Architecture Software

Developer's Manual, Volume 3B: System Programming Guide, Part 2

for more

information.

Figure 6-1. Processor Low Power State Machine

Normal State

- Normal Execution

Stop Grant State

- BCLK running

- Snoops and interrupts

allowed

Stop Grant Snoop State

- BCLK running

- Service Snoops to caches

Extended HALT Snoop or

HALT Snoop State

- BCLK running

- Service Snoops to caches

Extended HALT or HALT

State

- BCLK running

- Snoops and interrupts

allowed

HALT or MWAIT Instruction and

HALT Bus Cycle Generated
INIT#, INTR, NMI, SMI#, RESET#,

FSB interrupts

STPCLK#

Asserted

STPCLK#

De-asserted

STPCLK#

Asserted

STPCLK#

De-asserted

Snoop

Event

Occurs

Snoop

Event

Serviced

Snoop Event Occurs

Snoop Event Serviced

Содержание Core2 Extreme QX9000 Series









































































































Результаты поиска

Содержание Core2 Extreme QX9000 Series

Отзывы:

Похожие инструкции для Core2 Extreme QX9000 Series

Бренды по названию

Популярные бренды

Intel Core2 Extreme QX9000 Series, Техническое описание

Результаты поиска

Содержание Core2 Extreme QX9000 Series

Отзывы:

Похожие инструкции для Core2 Extreme QX9000 Series

Бренды по названию

Популярные бренды