Intel Core2 Extreme QX9000 Series Скачать руководство пользователя страница 16

Страница: 16 / 104

Electrical Specifications

Datasheet

2.2.3

FSB Decoupling

The processor integrates signal termination on the die. In addition, some of the high

frequency capacitance required for the FSB is included on the processor package.

However, additional high frequency capacitance must be added to the motherboard to

properly decouple the return currents from the front side bus. Bulk decoupling must

also be provided by the motherboard for proper [A]GTL+ bus operation.

2.3

Voltage Identification

The Voltage Identification (VID) specification for the processor is defined by the

Voltage

Regulator-Down (VRD) 11.0 Processor Power Delivery Design Guidelines For Desktop

LGA775 Socket.

The voltage set by the VID signals is the reference VR output voltage

to be delivered to the processor VCC lands (see

Chapter 2.6.3

for V

overshoot

specifications). Refer to

Table 2-11

for the DC specifications for these signals. Voltages

for each processor frequency is provided in

Table 2-3

Note:

To support the Deeper Sleep State the platform must use a VRD 11.1 compliant

solution. The Deeper Sleep State also requires additional platform support. For further

information on Voltage Regulator-Down solutions, contact your Intel field

representative.

Individual processor VID values may be calibrated during manufacturing such that two

devices at the same core speed may have different default VID settings. This is

reflected by the VID Range values provided in

Table 2-3

. Refer to the

Intel

Core™2

Extreme Processor QX9000 Series and Intel

Core™2 Quad Processor Q9000, Q9000S,

Q8000, and Q8000S Series Specification Update

for further details on specific valid core

frequency and VID values of the processor. Note that this differs from the VID

employed by the processor during a power management event (Thermal Monitor 2,

Enhanced Intel SpeedStep

technology, or Extended HALT State).

The processor uses eight voltage identification signals, VID[7:0], to support automatic

selection of power supply voltages.

Table 2-1

specifies the voltage level corresponding

to the state of VID[7:0]. A ‘1’ in this table refers to a high voltage level and a ‘0’ refers

to a low voltage level. If the processor socket is empty (VID[7:0] = 11111110), or the

voltage regulation circuit cannot supply the voltage that is requested, it must disable

itself. The processor provides the ability to operate while transitioning to an adjacent

VID and its associated processor core voltage (V

). This will represent a DC shift in

the load line. It should be noted that a low-to-high or high-to-low voltage state change

may result in as many VID transitions as necessary to reach the target core voltage.

Transitions above the specified VID are not permitted.

Table 2-3

includes VID step sizes

and DC shift ranges. Minimum and maximum voltages must be maintained as shown in

Table 2-4

and

Figure 2-1

as measured across the VCC_SENSE and VSS_SENSE lands.

The VRM or VRD used must be capable of regulating its output to the value defined by

the new VID. DC specifications for dynamic VID transitions are included in

Table 2-3

and

Table 2-4

. Refer to the Voltage Regulator Design Guide for further details.

Содержание Core2 Extreme QX9000 Series









































































































Результаты поиска

Содержание Core2 Extreme QX9000 Series

Отзывы:

Похожие инструкции для Core2 Extreme QX9000 Series

Бренды по названию

Популярные бренды

Intel Core2 Extreme QX9000 Series, Техническое описание

Результаты поиска

Содержание Core2 Extreme QX9000 Series

Отзывы:

Похожие инструкции для Core2 Extreme QX9000 Series

Бренды по названию

Популярные бренды