Intel Core2 Extreme QX9000 Series страница 84 Скачать руководство пользователя

Страница: 84 / 104

Thermal Specifications and Design Considerations

Datasheet

5.2.4

PROCHOT# Signal

An external signal, PROCHOT# (processor hot), is asserted when the processor core

temperature has reached its maximum operating temperature. If the Thermal Monitor

is enabled (note that the Thermal Monitor must be enabled for the processor to be

operating within specification), the TCC will be active when PROCHOT# is asserted. The

processor can be configured to generate an interrupt upon the assertion or de-

assertion of PROCHOT#.

PROCHOT# is a bi-directional signal. As an output, PROCHOT# (Processor Hot) will go

active when the processor temperature monitoring sensor detects that one or both

cores has reached its maximum safe operating temperature. This indicates that the

processor Thermal Control Circuit (TCC) has been activated, if enabled. As an input,

assertion of PROCHOT# by the system will activate the TCC, if enabled, for both cores.

The TCC will remain active until the system de-asserts PROCHOT#.

Note:

PROCHOT# will not be asserted (as an output) or observed (as an input) when the

processor is in the Stop Grant, Sleep, Deep Sleep, and Deeper Sleep low-power states,

hence the thermal solution must be designed to ensure the processor remains within

specification. If the processor enters one of the above low-power states with

PROCHOT# already asserted, PROCHOT# will remain asserted until the processor exits

the low-power state and the processor DTS temperature drops below the thermal trip

point.

PROCHOT# allows for some protection of various components from over-temperature

situations. The PROCHOT# signal is bi-directional in that it can either signal when the

processor (either core) has reached its maximum operating temperature or be driven

from an external source to activate the TCC. The ability to activate the TCC via

PROCHOT# can provide a means for thermal protection of system components.

Bi-directional PROCHOT# can allow VR thermal designs to target maximum sustained

current instead of maximum current. Systems should still provide proper cooling for the

VR, and rely on bi-directional PROCHOT# only as a backup in case of system cooling

failure. The system thermal design should allow the power delivery circuitry to operate

within its temperature specification even while the processor is operating at its Thermal

Design Power. With a properly designed and characterized thermal solution, it is

anticipated that bi-directional PROCHOT# would only be asserted for very short periods

of time when running the most power intensive applications. An under-designed

thermal solution that is not able to prevent excessive assertion of PROCHOT# in the

anticipated ambient environment may cause a noticeable performance loss. Refer to

the Voltage Regulator Design Guide for details on implementing the bi-directional

PROCHOT# feature.

5.2.5

THERMTRIP# Signal

Regardless of whether or not Thermal Monitor or Thermal Monitor 2 is enabled, in the

event of a catastrophic cooling failure, the processor will automatically shut down when

the silicon has reached an elevated temperature (refer to the THERMTRIP# definition in

Table 4-3

). At this point, the FSB signal THERMTRIP# will go active and stay active as

described in

Table 4-3

. THERMTRIP# activation is independent of processor activity and

does not generate any bus cycles.

Содержание Core2 Extreme QX9000 Series









































































































Результаты поиска

Содержание Core2 Extreme QX9000 Series

Отзывы:

Похожие инструкции для Core2 Extreme QX9000 Series

Бренды по названию

Популярные бренды

Intel Core2 Extreme QX9000 Series, Техническое описание

Результаты поиска

Содержание Core2 Extreme QX9000 Series

Отзывы:

Похожие инструкции для Core2 Extreme QX9000 Series

Бренды по названию

Популярные бренды