Intel Core2 Extreme QX9000 Series страница 12 Скачать руководство пользователя

Страница: 12 / 104

Introduction

Datasheet

The processor uses some of the infrastructure already enabled by 775_VR_CONFIG_05

platforms including heatsink, heatsink retention mechanism, and socket.

Manufacturability is a high priority; hence, mechanical assembly may be completed

from the top of the baseboard and should not require any special tooling.

1.1

Terminology

A ‘#’ symbol after a signal name refers to an active low signal, indicating a signal is in

the active state when driven to a low level. For example, when RESET# is low, a reset

has been requested. Conversely, when NMI is high, a nonmaskable interrupt has

occurred. In the case of signals where the name does not imply an active state but

describes part of a binary sequence (such as

address

data

), the ‘#’ symbol implies

that the signal is inverted. For example, D[3:0] = ‘HLHL’ refers to a hex ‘A’, and

D[3:0]# = ‘LHLH’ also refers to a hex ‘A’ (H= High logic level, L= Low logic level).

“Front Side Bus” refers to the interface between the processor and system core logic

(a.k.a. the chipset components). The FSB is a multiprocessing interface to processors,

memory, and I/O.

1.1.1

Processor Terminology Definitions

Commonly used terms are explained here for clarification:

•

Intel

Core™2 Extreme processor QX9000 series

— Quad core Extreme

Edition processor in the FC-LGA6 package with two 6 MB L2 cache.

•

Intel

Core™2 Quad processor Q9000 series

— Quad core processor in the FC-

LGA8 package with two 6 MB L2 caches or two 3 MB L2 caches.

•

Intel

Core™2 Quad processor Q8000 Series

— Quad core processor in the

FC-LGA8 package with two 4 MB L2 caches or two 2 MB L2 caches..

•

Intel

Core™2 Quad processor Q9000S series

— Low power Quad core

processor in the FC-LGA8 package with two 6 MB L2 caches or two 3 MB L2 caches.

•

Intel

Core™2 Quad Processor Q8000S Series

— Low power Quad core

processor in the FC-LGA8 package with two 4 MB L2 caches or two 2 MB L2 caches

caches.

•

Processor

— For this document, the term processor is the generic form of the

Intel

Core™2 Extreme processor QX9000 series, the Intel

Core™2 Quad

processor Q9000, Q9000S, Q8000, and Q8000S series.

•

Enhanced Intel

Core

microarchitecture —

A new foundation for Intel

architecture-based desktop, mobile and mainstream server multi-core processors.

For additional information refer to:

http://www.intel.com/technology/architecture/

coremicro/

•

Keep-out zone

— The area on or near the processor that system design can not

utilize.

•

Processor core

— Processor die with integrated L2 cache.

•

LGA775 socket

— The processor mates with the system board through a surface

mount, 775-land, LGA socket.

•

Integrated heat spreader (IHS)

—A component of the processor package used

to enhance the thermal performance of the package. Component thermal solutions

interface with the processor at the IHS surface.

•

Retention mechanism (RM)

— Since the LGA775 socket does not include any

mechanical features for heatsink attach, a retention mechanism is required.

Component thermal solutions should attach to the processor via a retention

mechanism that is independent of the socket.

•

FSB (Front Side Bus)

— The electrical interface that connects the processor to

the chipset. Also referred to as the processor system bus or the system bus. All

Содержание Core2 Extreme QX9000 Series









































































































Результаты поиска

Содержание Core2 Extreme QX9000 Series

Отзывы:

Похожие инструкции для Core2 Extreme QX9000 Series

Бренды по названию

Популярные бренды

Intel Core2 Extreme QX9000 Series, Техническое описание

Результаты поиска

Содержание Core2 Extreme QX9000 Series

Отзывы:

Похожие инструкции для Core2 Extreme QX9000 Series

Бренды по названию

Популярные бренды