Intel Compute Module MFS2600KI Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 111

Intel Compute Module MFS2600KI Скачать руководство пользователя страница 41

BIOS Setup Utilities

30

Intel

®

Compute Module MFS2600KI User Guide

Advanced Screen (Tab)

The Advanced screen provides an access point to configure several groups of options. On this
screen, the user can select the option group to be configured. Configuration actions are performed
on the selected screen, and not directly on the Advanced screen.

This screen is the same for all board series, selecting between the same groups of options, although
the options for different boards are not necessarily identical.

To access this screen from the

Main

screen or other top-level

Tab

screen, press the right or left

arrow keys to traverse the tabs at the top of the Setup screen until the

Advanced

screen is selected.

Figure 25. Advanced Screen

Screen Field Descriptions:

1.

Processor Configuration

Option Values:

<None>

Help Text:

View/Configure processor information and settings.

Comments:

Selection only.

Position to this line and press the <Enter> key to go to the

Processor Configuration

group of configuration settings.

«
...
39
40
41
42
43
...
»

Содержание Compute Module MFS2600KI
















































































































Отзывы:

Нет отзывов