Intel 480T, Руководство пользователя

Страница: 290 / 367

288
C H A P T E R 1 6 Using Web Device Manager
To display the status of Web access, use the following command:
show management
To disable Web access, use the following command:
disable web
To re-enable Web access, use the following command:
enable web {access-profile [<access-profile> |
none]} {port <tcp_port_number>]
You will need to reboot the system in order for these changes to take
effect.
To use Web Device Manager, at least one VLAN must be assigned
an IP address.
Setting Up Your Browser
In general, the default settings that come configured on your
browser work well with Web Device Manager. The following are
recommended settings that you can use to improve the display
features and functionality of Web Device Manager:
• After downloading a newer version of the switch image, clear the
browser disk and memory cache to see the updated menu screens.
You must clear the cache while at the main Logon screen, so that
all underlying .GIF files are updated.
• Check for newer versions of stored pages. Every visit to the page
should be selected as a cache setting.
If you are using Netscape Navigator, configure the cache option
to check for changes “Every Time” you request a page.
If you are using Microsoft Internet Explorer, configure the
Temporary Internet Files setting to check for newer versions of
stored pages by selecting “Every visit to the page.”
• Images must be auto-loaded.
• Use a high-resolution monitor to maximize the amount of
information displayed in the content frame. The recommended
resolution is 1024 x 768 pixels. You can also use 800 x 600 pixels.
• Turn off one or more of the browser toolbars to maximize the
viewing space of the content screen.