manualshive.com logo in svg

Intel 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES 01-2011, Технические характеристики

Поделиться
Скачать
Intel 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES 01-2011 Скачать руководство пользователя страница 9

Thermal/Mechanical Specifications and Design Guidelines

9

Introduction

1

Introduction

The goal of this document is to provide thermal and mechanical specifications for the 
processor and the associated socket. The usual design guidance is also included.

The components described in this document include: 

• The thermal and mechanical specifications for the following Intel

®

 desktop 

processors:

— Intel

® 

Core™ i7-2000 desktop processor series

— Intel

® 

Core™ i5-2000 desktop processor series

— Intel

® 

Core™ i3-2000 desktop processor series

• The LGA1155 socket and the Independent Loading Mechanism (ILM) and back 

plate.

• The reference design thermal solution (heatsink) for the processors and associated 

retention hardware.

The Intel

® 

Core™ i7-2000, i5-2000 and i3-2000 desktop processor series has the 

different thermal specifications. When required for clarity, this document will use:

— Intel

® 

Core™ i7-2000 and i5-2000 desktop processor series (Quad Core 95W)

— Intel

® 

Core™ i7-2000 and i5-2000 desktop processor series (Quad Core 65W)

— Intel

® 

Core™ i3-2000 desktop processor series (Dual Core 65W) 

— Intel

® 

Core™ i5-2000 desktop processor series (Quad Core 45W)

— Intel

® 

Core™ i5-2000 and i3-2000 desktop processor series (Dual Core 35W)

Note:

When the information is applicable to all products the this document will use 

“processor” or “processors” to simplify the document.

Содержание 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES 01-2011







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды