Intel 10 Gigabit AT Ethernet Server Adapter Скачать руководство пользователя страница 28

Страница: 28 / 165

Intel PROSet Installation

To install Intel PROSet on Microsoft* Windows Server* Nano Server:

1. Use the New-NanoServerImage cmdlet to add the PROSetNS.zip file from the

.\Disk\APPS\PROSETDX\NanoServer directory to your -CopyPath parameter.

2. Append the NanoSetup.ps1 file (located in the same directory) to your -SetupCompleteCommands

parameter.

For example:

New-NanoServerImage ...

-CopyPath "<PATH>\PROSetNS.zip", "<PATH>\NanoSetup.ps1" `

-SetupCompleteCommands "PowerShell ""C:\NanoSetup.ps1"""

See the link below for more information on deploying a Nano Server image and using the cmdlet:

https://msdn.microsoft.com/en-us/library/mt126167.aspx

Installing Intel PROSet

Intel PROSet for Windows Device Manager is an advanced configuration utility that incorporates additional
configuration and diagnostic features into the device manager.

NOTES:

You must install Intel® PROSet for Windows Device Manager if you want to use Intel® ANS
teams or VLANs.

Intel PROSet for Windows Device Manager is installed by default when you install the
device drivers. For information on usage, see

Using Intel® PROSet for Windows Device

Manager

Intel PROSet for Windows Device Manager is installed with the same process used to install drivers.

NOTES:

You must have administrator rights to install or use Intel PROSet for Windows Device
Manager.

Upgrading PROSet for Windows Device Manager may take a few minutes.

1. On the autorun, click

Install Base Drivers and Software

NOTE:

You can also run setup64.exe from the files downloaded from

Customer Support

2. Proceed with the installation wizard until the

Custom Setup

page appears.

3. Select the features to install.

4. Follow the instructions to complete the installation.

If Intel PROSet for Windows Device Manager was installed without ANS support, you can install support by
clicking

Install Base Drivers and Software

on the autorun, or running setup64.exe, and then selecting the

Modify

option when prompted. From the Intel® Network Connections window, select

Advanced Network

Services

then click Next to continue with the installation wizard.

Содержание 10 Gigabit AT Ethernet Server Adapter






































































































































































Результаты поиска

Содержание 10 Gigabit AT Ethernet Server Adapter

Отзывы:

Intel 10 Gigabit AT Ethernet Server Adapter, Руководство пользователя, Страница: 28 / 165

Результаты поиска

Содержание 10 Gigabit AT Ethernet Server Adapter

Отзывы: