22
Integrated Technical Vision Ltd
http://www.itvsystems/com/ua
Door
sensor
+12V power
supply
RTE button
outer security
system input
connection
other facilities
tamper
connection
GND
+12V
ALM CM1
RTE DC I/O
SAB
NC1 NO1 CM2 NC2 NO2
APPENDIX 1
Access Control System
DLK-640Plus can be used for access to a single room control. The wiring is shown
on figure below.
In this example Relay 1 is used to energize electric lock. Terminals wiring is shown
for the lock, locked while been deenergized. Using the lock which is unlocked
while been deenergized, connect it to NC terminal.
You can use Relay 2 terminals for additional devices engaging.
The input can be used for 24 hours if door time for all codes is set to ‘0’.
APPENDIX 1
