USER MANUAL - LBU-ONL 1.5K/2.25K/3K/4.5K
VER.2211.17-One (ENG)
4
3.
SAFETY, QUALITY AND PERFORMANCE STANDARDS
SAFETY - LOW VOLTAGE DIRECTIVE (2006/95/EC)
Inverter Part 1-1: General & Safety Inverter in accessible areas
IEC/EN 62040-1
ELECTROMAGNETIC COMPATIBILITY - EMC DIRECTIVE (2004/108/EC)
Inverter, Part 2, Electromagnetic Compatibility:
IEC/EN 62040-2
Low Freq. Conducted Disturbances & Signals:
IEC/EN 61000-2-2
Electrostatic discharge immunity Test:
IEC/EN 61000-4-2 (Level 3)
Radiated radio Frequency immunity:
IEC/EN 61000-4-3 (Level 3)
Electrical Fast Transient / burst immunity:
IEC/EN 61000-4-4 (Level 4)
Surge immunity:
IEC/EN 61000-4-5 (Level 4)
Conducted Immunity:
IEC/EN 61000-4-6
Power frequency magnetic field immunity:
IEC/EN 61000-4-8
Voltage Dips, Short Interruptions & Voltage Variations Immunity:
IEC/EN 61000-4-11
PERFORMANCE: Inverter Part 3: Methods of operation, specs and test requirement
IEC/EN 62040-3
IT Equipment. SAFETY. Part 1: General Requirements
IEC/EN 60950-1
BATTERY SAFETY
EN 50272
FCC Part 15 (for 120V models only)
FCC Part 15 Class A
IP PROTECTION
IP21 (static)
QUALITY MANAGEMENT:
Manufactured under:
ISO 9001 : 2008
ENVIRONMENTAL MANAGEMENT:
Manufactured under:
ISO 14001 : 2015
TRANSPORTATION:
IEC/EN 60068-2-32 (Drop Test)
IEC/EN 60068-2-64 (Vibration Test)
IEC/EN 60068-2-27 (Shock Test)
WARNING: Modifications made on the product or the use of this product as a part of a more complex system not expressly approved by the party
responsible for complia
nce could void the user’s authority to operate the equipment. It also could affect its performance and the compliance of
regulations. XMART is not responsible of modifications made after manufacturing.
WARNING: This is a category C2 Inverter product. In a residential environment, this product may cause radio interference, in which case the user
may be required to take additional measures (only for 220/230/240VAC systems).
NOTE FOR 110/120 VAC SYSTEMS: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference at his own expense.
