Integra DTR-40.5, Инструкция по эксплуатации

Страница: 57 / 104

Advanced Operations
En-57
Operating
procedure
(
➔
page 55 )
HDMI Input
If you connect a video component to an HDMI input,
you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player
to
HDMI IN 2 , you must assign “ HDMI2 ” to the
“ BD/DVD ” input selector.
If you’ve connected your TV to the AV receiver with
an HDMI cable, composite video and component
video sources can be upconverted
* and output by the
HDMI output. You can set this for each input selector
by selecting the “
- - - - - ” option, but the video signal
coming from the HDMI output depends on the
assignments of “
Component Video Input ” and
“ Composite Video Input ”. See “The video and audio
signal flow” for more information on video signal flow
and upconversion (
➔
page 16 ).
Here are the default assignments.
■
BD/DVD, CBL/SAT, STB/DVR, GAME, PC, TV/CD,
PHONO
`
HDMI1 , HDMI2 , HDMI3 , HDMI4 , HDMI5 , HDMI6 ,
HDMI7 :
Select the input to which the component has
been connected.
`
- - - - - :
Output composite video and component video
sources from the HDMI output. The video signal
coming from the HDMI output depends on the
assignments of “
Component Video Input ” and
“ Composite Video Input ”.
Each HDMI input cannot be assigned to two input
selectors or more. When
HDMI1 - HDMI7 have
already been assigned, you must first set any
unused input selectors to “
- - - - - ” or you will be
unable to assign HDMI1 - HDMI7 to other input
selectors.
Note
• If no video component is connected to the HDMI input (even
if the HDMI input is assigned), the AV receiver selects the
video source based on the setting of “
Component Video
Input ” and “ Composite Video Input ”.
• When an HDMI IN is assigned to an input selector as
explained here, the same HDMI IN will be set as a priority
in the “ Digital Audio Input ”. In this case, if you want to use
the coaxial or optical audio input, make the appropriate
selection in the “
Audio Selector ” setting (
➔
page 67 ).
• Do not assign an HDMI IN to the TV/CD selector while
“ HDMI CEC (RIHD) ” is set to “ On ” (
➔
page 70 ), otherwise
appropriate CEC (Consumer Electronics Control) operation
will not be guaranteed.
• If you assign “ - - - - - ” to an input selector that is currently
selected in “ HDMI Through ” (
➔
page 70 ), the “ HDMI
Through ” setting will be automatically switched to “ Off ”.
• “ AUX ” is used only for input from the front panel.
• In order for the AV receiver to upconvert component input
to HDMI output, the source output must be set to 480i/576i.
When signal is input at resolution of 480p/576p and more,
error message will be displayed.
Component Video Input
If you connect a video component to a component
video input, you must assign that input to an input
selector. For example, if you connect your Blu-ray
Disc/DVD player to
COMPONENT VIDEO IN 2 , you
must assign “ IN2 ” to the “ BD/DVD ” input selector.
Here are the default assignments.
■
BD/DVD , CBL/SAT , STB/DVR, GAME , PC , AUX ,
TV/CD , PHONO
`
IN1 , IN2 :
Select the input to which the component has
been connected.
`
- - - - - :
Output composite video sources from the HDMI
output. The upconverted output from HDMI
depends on the assignment of “
Composite
Video Input ”.
Note
• When composite video and component video sources are
upconverted for HDMI OUT SUB , only signals with a
resolution of 480i/576i are output and the resolution
remains the same. If your TV doesn’t support this
resolution, there will be no picture (
➔
page 92 ).
Input selector Default assignment
BD/DVD HDMI1
CBL/SAT HDMI2
STB/DVR HDMI3
GAME HDMI4
PC HDMI5
AUX Front/MHL (Fixed)
TV/CD - - - - -
PHONO - - - - -
IN
OUT
Composite video,
component video HDMI
HDMI Composite video,
component video
Input selector Default assignment
BD/DVD IN1
CBL/SAT IN2
STB/DVR - - - - -
GAME - - - - -
PC - - - - -
AUX - - - - -
TV/CD - - - - -
PHONO - - - - -