54
En
Main menu
Audio Adjust
With the Audio Adjust functions and settings, you can
adjust the sound and listening modes as you like.
Multiplex/Mono
■
Multiplex
This setting determines which channel of a stereo multi-
plex source is output. Use it to select audio channels or
languages with multiplex sources, multilingual TV
broadcasts, and so on.
Input Channel
Main
:
The main channel is output.
Sub
:
The sub channel is output.
Main/Sub
:
Both the main and sub channels are output.
■
Mono
This setting specifies the channel to be used for playing
any 2-channel digital source such as Dolby Digital, or
2-channel analog/PCM source in the Mono listening
mode.
Input Channel
Left + Right
:
Both the left and right channels are output.
Left
:
Only the left channel is output.
Right
:
Only the right channel is output.
Output Speaker
Center
:
Mono audio is output by the center speaker.
Left / Right
:
Mono audio is output by the front left and right
speakers.
This setting determines which speakers output mono
audio when the Mono listening mode is selected.
Note
• If the “
Center
” setting is set to “
None
” (
), this setting is
fixed at “
Left / Right
”.
Dolby
■
PLIIx Music (2ch Input)
These settings apply to only 2-channel stereo sources.
If you’re not using any surround back speakers, these
settings apply to Dolby Pro Logic II, not Dolby Pro
Logic IIx.
Panorama
On
:
Panorama function on.
Off
:
Panorama function off.
With this setting, you can broaden the width of the front
stereo image when using the Dolby Pro Logic IIx Music
listening mode.
Dimension
–3
to
0
to
+3
With this setting, you can move the sound field forward
or backward when using the Dolby Pro Logic IIx Music
listening mode. Higher settings move the sound field
backward. Lower settings move it forward.
If the stereo image feels too wide, or there’s too much
surround sound, move the sound field forward to
improve the balance. Conversely, if the stereo image
feels like it’s in mono, or there’s not enough surround
sound, move it backward.
Center Width
0
to
3
to
7
With this setting, you can adjust the width of the sound
from the center speaker when using the Dolby Pro
Logic IIx Music listening mode. Normally, if you’re
using a center speaker, the center channel sound is out-
put by only the center speaker. (If you’re not using a
center speaker, the center channel sound will be distrib-
uted to the front left and right speakers to create a phan-
tom center). This setting controls the front left, right,
and center mix, allowing you to adjust the weight of the
center channel sound.
■
PLIIz Height Gain
The Height Gain Control in Dolby Pro Logic IIz
enables the listener to select how much gain is applied
to the front high speakers. There are three settings,
“
Low
”, “
Mid
” and “
High
”, and the front high speakers
are accentuated in that order. While “
Mid
” is the default
listening setting, the listener may adjust the Height Gain
Control to their personal preference.
Low
:
Low PLIIz Height Gain becomes active.
Mid
:
Medium PLIIz Height Gain becomes active.
High
:
High PLIIz Height Gain becomes active.
Note
• If the “
Front High
” settings is set to “
None
), this setting
cannot be selected.
Audio Adjust
Содержание DTR-40.2
Страница 1: ...AV Receiver DTR 40 2 Instruction Manual...