Integra DTR-40.2, Инструкция по эксплуатации

Страница: 15 / 104

15
En
Using Dipole Speakers
You can use dipole speakers for the surround and surround
back speakers. Dipole speakers output the same sound in two
directions.
Dipole speakers typically have an arrow printed on them to
indicate how they should be positioned. The surround dipole
speakers should be positioned so that their arrows point
toward the TV/screen, while the surround back dipole speak-
ers should be positioned so that their arrows point toward
each other, as shown.
ab
Front speakers
c
Center speaker
de
Surround speakers
f Subwoofer(s)
gh
Surround back speakers
ij
Front high speakers
kl
Front wide speakers
Connecting the Powered Subwoofers
Using a suitable cable, connect the AV receiver’s
SUBWOOFER PRE OUT
jack to an input on
your powered subwoofer, as shown. If your sub-
woofer is unpowered and you’re using an external
amplifier, connect the
SUBWOOFER PRE OUT
jack to an input on the amp.
You can connect the powered subwoofer with two
SUBWOOFER PRE OUT jacks respectively.
The same signal is output from each jack.
Bi-amping the Front Speakers
The FRONT L/R and SURR BACK L/R terminal posts can be
used with front speakers and surround back speakers respec-
tively, or bi-amped to provide separate tweeter and woofer feeds
for a pair of front speakers that support bi-amping, providing
improved bass and treble performance.
• When bi-amping is used, the AV receiver is able to drive up to
a 5.1 speaker system in the main room.
• For bi-amping, the FRONT L/R terminal posts connect to the
front speakers’ woofer terminals; the SURR BACK L/R ter-
minal posts connect to the front speakers’ tweeter terminals.
• Once you’ve completed the bi-amping connections shown
below and turned on the AV receiver, you must set the “ Speak-
ers Type(Front) ” setting to “ Bi-Amp ” to enable bi-amping
(
➔
50
).
Important:
• When making the bi-amping connections, be sure to remove the jumper bars that link the speakers’ tweeter (high) and woofer (low)
terminals.
• Bi-amping can be used only with speakers that support bi-amping. Refer to your speaker manual.
f
c b a
g h
d e
f
a k k b l c
d e
g h
i j i j
l
f f
TV/screen TV/screen
Dipole speakers
Normal speakers
Powered subwoofer
Woofer (low)
Left
speaker
Tweeter (high)
Right
speaker