background image

32

En

DTS-HD High 
Resolution Audio

(Continued from the previous page.)

D

XCN

F

XCN

DTS-HD Master 
Audio

DTS Express

S
D

XCN

DSD

*3

D

XCN

DTS 96/24

*4

This mode is for use with DTS 96/24 sources. This is high-resolution DTS 
with a 96 kHz sampling rate and 24-bit resolution, providing superior fidel-
ity. Use it with DVDs that bear the DTS 96/24 logo.

D

XCN

DTS-ES Discrete

*5

This mode is for use with DTS-ES Discrete soundtracks, which use a dis-
crete surround back channel for true 6.1/7.1-channel playback. The seven 
totally separate audio channels provide better spatial imaging and 360-
degree sound localization, perfect for sounds that pan across the surround 
channels. Use it with DVDs that bear the DTS-ES logo, especially those with 
a DTS-ES Discrete soundtrack.

G

N

DTS-ES Matrix

*5

This mode is for use with DTS-ES Matrix soundtracks, which use a matrix-
encoded back-channel for 6.1/7.1-channel playback. Use it with DVDs that 
bear the DTS-ES logo, especially those with a DTS-ES Matrix soundtrack.

G

N

DTS Neo:6

This mode expands any 2-channel source for up to 7.1-channel playback. It 
uses seven full-bandwidth channels of matrix decoding for matrix-encoded 
material, providing a very natural and seamless surround sound experience 
that fully envelops the listener.

• Neo:6  Cinema

Use this mode with any stereo movie (e.g., TV, DVD, VHS).

• Neo:6  Music

Use this mode with any stereo music source (e.g., CD, radio, cassette, TV, 
VHS, DVD).

S

XCN

This mode uses Neo:6 to expand 5.1-channel sources for 6.1/7.1-channel 
playback.

D

N

Listening Mode

Description

Input 
Source

Speaker 
Layout

D T S – H D

H R

D T S – H D

M S T R

D T S

E x p r e s s

D S D

D T S e

e 9 6 / 2 4

P P

E S

S

D i s c r e t e

E S

S

M a t r i x

t e

N e o : 6

t r i x t e

N e o : 6

t r i x t e

N e o : 6 C i n e m a

N e o : 6

t

M u s i c

Содержание DTR-20.2









































































Отзывы: