Integra DTR-20.2, Инструкция по эксплуатации

Страница: 28 / 72

28
En
Recording
This section explains how to record the selected input source to a component with recording capability, and how to record
audio and video from different sources.
Connecting a Recording Component
Note
• The AV receiver must be turned on for recording. Recording is
not possible while it’s in Standby mode.
• If you want to record directly from your TV or playback VCR to
the recording VCR without going through the AV receiver, con-
nect the TV/VCR’s audio and video outputs directly to the
recording VCR’s audio and video inputs. See the manuals sup-
plied with your TV and VCR for details.
• Video signals connected to composite video inputs can be
recorded only via composite video outputs. If your TV/VCR is
connected to a composite video input, the recording VCR must
be connected to a composite video output.
• The surround sound and DSP listening modes cannot be
recorded.
• Copy-protected Blu-ray Disc/DVDs cannot be recorded.
• Sources connected to a digital input cannot be recorded. Only
analog inputs can be recorded.
• DTS signals will be recorded as noise, so don’t attempt analog
recording of DTS CDs or LDs.
AV Recording
Audio sources can be recorded to a recorder (e.g., cassette
deck, CDR, MD) connected to the
VCR/DVR OUT
jacks.
Video sources can be recorded to a video recorder (e.g.,
VCR, DVD recorder) connected to the
VCR/DVR OUT
jack.
Recording from Different AV Sources
You can overdub audio onto your video recordings by
simultaneously recording audio and video from two sepa-
rate sources. This is possible because only the audio
source is switched when an audio-only input source (
TV/
CD ) is selected, the video source remains the same.
In the following example, audio from the CD player con-
nected to the
TV/CD IN
and video from the camcorder
connected to the
BD/DVD IN V
jack are recorded by the
VCR connected to the
VCR/DVR OUT
jacks.
1
Use the input selector buttons to select the source
that you want to record.
You can watch the source while recording. The AV
receiver’s
Master Volume
control has no effect on
recording.
2
On your recorder, start recording.
3
On the source component, start playback.
If you select another input source during recording,
that input source will be recorded.
AUDIO
IN
L R
VIDEO
IN
Cassette, CDR,
MD, etc.
VCR,
DVD recorder
1
Prepare the camcorder and CD player for play-
back.
2
Prepare the VCR for recording.
3
Press
BD/DVD
input selector.
4
Press TV/CD input selector.
This selects the CD player as the audio source but
leaves the camcorder as the video source.
5
Start recording on the VCR and start playback on
the camcorder and CD player.
The video from the camcorder and the audio from
the CD player are recorded by the VCR.
VCR CD player
: Video signal
: Audio signal
Camcorder