background image

72

 

Specifications

 

Advanced Setup

 

Listening Modes

 

Network Functions

 

Basic Manual

|

Troubleshooting

Supplementary Information, etc.

BLUETOOTH function (for compatible models 

only)

• 

Try plugging/unplugging the power of the unit and try 

turning on/off the BLUETOOTH wireless technology 

enabled device. Re-startup of the BLUETOOTH 

wireless technology enabled device may be effective.

• 

The BLUETOOTH wireless technology enabled devices 

must support the A2DP profile.

• 

Near components such as microwave oven or cordless 

phone, which use the radio wave in the 2.4 GHz range, 

a radio wave interference may occur, which disables the 

use of this unit.

• 

If there is a metallic object near the unit, BLUETOOTH 

connection may not be possible as the metal can effect 

on the radio waves.

Check the following if the above does not fix the problem:

 

Cannot connect with this unit

• 

Check that the BLUETOOTH function of the 

BLUETOOTH wireless technology enabled device is 

enabled.

 

Music playback is unavailable on the unit even after 

successful BLUETOOTH connection

• 

When the audio volume of your BLUETOOTH wireless 

technology enabled device is set low, the playback of 

audio may be unavailable. Volume up the BLUETOOTH 

wireless technology enabled device.

• 

Depending on the BLUETOOTH wireless technology 

enabled device, Send/Receive selector switch may be 

provided. Select Send mode.

• 

Depending on the characteristics or specifications of 

your BLUETOOTH wireless technology enabled device, 

playback on the unit is not guaranteed.

 

Sound is interrupted

• 

Problem may be occurring at the BLUETOOTH wireless 

technology enabled device. Check the information on 

the internet.

 

The audio quality is poor after connection with a 

BLUETOOTH wireless technology enabled device

• 

The BLUETOOTH reception is poor. Move the 

BLUETOOTH wireless technology enabled device 

closer to the unit or remove any obstacle between the 

BLUETOOTH wireless technology enabled device and 

this unit.

Network function

• 

If you cannot select a network service, it will become 

selectable when the network function is started. It may 

take about a minute to start up.

• 

When NET is blinking, this unit is not properly 

connected to the home network.

• 

Try plugging/unplugging the power supply of this unit 

and the router, and try rebooting the router.

• 

If the desired wireless LAN router is not in the access 

point list, it may be set to hide SSID or the ANY 

connection may be off. Change the setting and try again. 

(for compatible models only)

Check the following if the above does not fix the problem:

 

Cannot access the Internet radio

• 

Certain network service or contents available through 

the unit may not be accessible in case the service 

provider terminates its service.

• 

Make sure that your modem and router are properly 

connected, and make sure they are both turned on.

• 

Make sure that the LAN side port on the router is 

properly connected to this unit.

• 

Make sure that connecting to Internet from other 

components is possible. If connecting is not possible, 

turn off all components connected to the network, wait 

for a while, and then turn on the components again.

• 

If a specific radio station is unavailable for listening, make 

sure the registered URL is correct, or whether the format 

distributed from the radio station is supported by this unit.

• 

Depending on ISP, setting the proxy server is 

necessary.

• 

Make sure that the used router and/or modem is 

supported by your ISP.

 

Cannot access the network server

• 

This unit needs to be connected to the same router as 

the network server.

• 

This unit is compatible with Windows Media

R

 Player 11 

or 12 network servers or NAS that are compatible with 

home network functionality.

• 

You may need to make some settings on Windows 

Media

R

 Player. Check in "Music Server" in "Network 

Содержание DRC-R1.1




















































































































Отзывы: