INSYS EloStar Master 3X0 Скачать руководство пользователя страница 69

Страница: 69 / 112

EloStar Master 3X0 / 4X0 / - smart

Operation

Manual V.1.03H

7.12.9

Closing a Lock

Closing a lock after OTC input has not been evaluated by UL.

Settings

The bolt work contact does not actively prevent lock
closure. Via software PC software

, the option ‘Manual

closing with code query’ has not been selected.

Press key

Clear

and release it after a second.

Open

is on display.

With key

select

and press key

Enter

Close

and, as the case may be,

Lock 1

are on display

With key

select the lock, if necessary, and press

Enter.

Close | Please wait

is on display. The lock bolt engages.

Close | Lock closed no.

is on display.

You have successfully closed a lock.

7.12.10

Closing a Lock with Code Input

In order to close a lock by entering code, either PIN- or card code
(TwinCard code access) is sufficient.

Settings

Via software TwinComm USB, option ‘Manual
closing with code query’ has been selected.
Boxes

Release

Close & code

PIN code

Card

of the user matrix have been marked for you.

Press key

Enter

and release it after a second.

The system checks its status. Date and time are on display.

With key

select

and key

Enter

Close

and, with a system with 2 or 3 locks,

Lock 1

are on display.

If required, select the lock with menu key

and press

Enter

Code entry | User: Master

is on display.

Present your user identification data.

Also see

‘User- / Personnel Numbers’ on page 51.

User No | PIN code

is on display.

Select

PIN-Code

Code card

and enter code or insert card.

See the instructions ‘Open a Lock by …’ at the beginning of this chapter.

Close

| Please wait

is on display. The lock bolt engages.

Close | Lock closed no.

is on display.

You have successfully closed a lock.

7.12.11

Closing Automatically with the Door Switch

This option can be set via optional software.

Settings

The bolt work switch is not in a position in which it prevents
automatic closing.

•

Close the door of the safe / box / container.

Via regular checks on the state of door- and bolt switches, the system registers
that the door has been closed and the system closes the locks automatically.

The lock has closed automatically.

Содержание EloStar Master 3X0

















































































































Результаты поиска

Содержание EloStar Master 3X0

Отзывы:

Похожие инструкции для EloStar Master 3X0

Бренды по названию

Популярные бренды

INSYS EloStar Master 3X0, Руководство по сборке

Результаты поиска

Содержание EloStar Master 3X0

Отзывы:

Похожие инструкции для EloStar Master 3X0

Бренды по названию

Популярные бренды