EloStar Master 3X0 / 4X0 / - smart
Operation
Manual V.1.03H
63
7.12.2
Opening also with Code Card (RFID cards also)
Settings
Boxes
Card
,
Release
,
1 0f 3
,
Open locks
and, if required,
Disarm
of the user matrix have been marked for you. The lock master has
registered your code card at the lock.
Take
the optional chip card TwinCard code access.
1.
Press key
Enter
and release it after a second.
The system checks its status. Date and time are on display.
2.
With key
<
or key
>
select
Open
and confirm with key
Enter
.
If the lock is open, menu
Open
cannot be selected.
With 2 or 3 locks in the system,
Lock: 1
is on display, too.
3.
If necessary, select the lock with menu key
<
or
>
and press
Enter
again.
Code entry | User: Master
is on display. If you confirm with
Enter
,
Master | PIN code
is on display and you can select
Code card
and open
as ‘master’.
4.
With numeric keys or with
<
and
>
and
Enter
select your user number.
Also see
‘User- / Personnel Numbers’ on page 51.
User no. | PIN code
is on display.
5.
With < or > select
Code card
and press
Enter
.
User no. | Insert card
is on display.
User no. | Reading data
is on display with RFID cards.
6.
Insert card TwinCard code access into card slot / Have RFID card read.
See the instructions on page 58 and 59.
Please wait
and with chip cards
Remove card
are on display.
7.
Remove the card.
Please wait
, afterwards
OK
and
User no. | PIN code
may be on
display. In this case, you can additionally enter PIN code, if necessary.
For users, who have entered PIN code already,
Open| Please wait
is on
display. The lock bolt is retracted.
Open | Lock open: No.
is on display
and, with all locks open,
System unlocked
. Is, too.
You have successfully opened the lock.
