EloStar Master 3X0 / 4X0 / - smart
Operation
Manual V.1.03H
54
7.9.1
Fields and Boxes of the User Matrix
Caution
Users cannot open locks in case they have not been authorised
sufficiently.
Mark / Unmark the boxes / squares for authorisation only after
reading this manual and, if required, after having consulted an expert
on system EloStar Master.
.
In order to be able to open locks, for example, a user has to be authorised to do so.
Users and lock masters (= user 00) can be authorised to open locks by the system
manager, who cannot open locks.
See below a list of all boxes and fields for users of the user matrix of the PC software.
The system manager can change certain authorisations.
Fields and Boxes / Squares for the Authentication of Users
PIN code
Enable entering PIN code
Card
Enable inserting a card (RFID- / Chip card)
Fingerprint
Enable entering biometric data (with biometric systems only)
1 of 3
Enable selecting one way of code input (PIN code or code card or,
with biometric systems fingerprint)
2 of 3
Enable selecting two ways out of three possible ways of code input
(with biometric systems only)
Boxes for Releasing Functions
Quick open code
Enable opening locks even when they are blocked (override active
time programs like week programs, block period)
Release
General authorisation for enter code
Open
Enable opening locks
Close
Enable closing locks
(only with „closing with code“)
Service
Enable importing the configuration and assigning week programs
2-eyes
Enable opening / closing triggered by this user autonomously,
even with 4-eyes principle activated
Disarm
not relevant with EloStar systems
Boxes for the Assignment of Time Programs
WP1
– WP5
Enable week program 1-5
Further Fields and Boxes
Language
Not used. Field for the user specific assignment of one of the
languages 1, 2 and 3
set on tab ‘Settings’
Single-use code
Box for assigning the use of single-use code (OTC, code
becoming invalid after having been entered once)
Fixed code
Not used. Box for assigning fixed code (not to be changed by user)
No-return-c.
Box for assigning fixed code that can be used once within a
defined interval (number of hours)
Personnel no.
Field for entering a personnel no. with up to 6 digits.
Only with box ‘Personnel number’ on top of the user list ticked /
marked, all users enter their personnel number instead of their
user number at the operating unit before they can open a lock.
Template name
no right, optional, display of the label of a template assigned to a
user, as it may be (in case the templates have not been deleted or
renamed after their assignment)
