Functions
i-modul ISDN HIX V4
Configuration with AT commands
To select the protocol, enter a value from
the "AT-<n>" column of Table 9 for the
parameter <n>.
ATB<n>
To set the V.110 asynchron protocol use
the command
ATB0
To set the HDLC transparent protocol use
the command
ATB4
6.9
Outputting CLIP of Incoming Calls
The i-modul ISDN HIX V4 can output the phone number of incoming calls via its
serial interface using CLIP (Calling Line Identification Presentation). This function
can be used for example to acknowledge messages, which are sent to a mobile
phone by an application via the i-modul ISDN HIX V4. The CLIP of the caller is
output in the format [xxxxxxxx].
Configuration with AT commands
In order to display the phone number vie
CLIP using the extended responses, use the
command
ATW1
In order to define, which type of incoming
calls are to be indicated use the command
AT#C2
In order to indicate all calls, use the com-
mand
AT#C2=00000001
In order to output the number of the last
caller, use the command
AT#O
In order to indicate only analogue calls for
example, use the command
AT#C2=00030012
34