i-modul ISDN HIX V4
Functions
6.4.4
Configuring the Permitted Callers for Remote Configuration
You can create a list with up to 10 (3 for FW < 1.027) phone numbers, which are
permitted as caller numbers for remote configuration of the i-modul ISDN HIX V4.
The i-modul ISDN HIX V4 ignores each incoming call with a phone number, which
does not match with one of the entries of the list. The i-modul ISDN HIX V4
compares the number of the caller with each entry of the list for this. The
comparison starts with the last digit of the phone number. It will be compared until
an entry matches a caller number. If a table entry contains only an asterisk "*",
each incoming call is accepted. If the table is empty, the i-modul ISDN HIX V4
accepts each caller for remote configuration.
The list is empty as default setting.
Configuration with AT commands
In order to output the phone number of a
caller together with the RING message in
the terminal window, use the command
ATV2
In order to define the permitted caller for
remote configuration, enter the phone
number of the permitted callers in the table
racctab.
<n> is the number of the table entry and
can take on the values 1 to 10 (3 for FW <
1.027).
<callno> is the transmitted phone number
of the permitted caller.
The maximum length of the phone number
is 20 digits.
* : is a wildcard for one or more digits.
AT**racctab<n>=<callno
>
only the entered number is accepted
AT**racctab1=089123456
all numbers starting with "089123" are
accepted
AT**racctab1=*89123*
all numbers ending with "1234" are
accepted
AT**racctab1=*1234
all incoming calls are accepted, without
sub-address
AT**racctab1=*
In order to query the table, use the
command
AT**racctab
In order to delete an entry, use the
command
AT**racctab<n>=-
29