manualshive.com logo in svg

insys icom i-modul ISDN HIX V4, Руководство дизайнера, Страница: 24 / 76

Поделиться
Скачать
insys icom i-modul ISDN HIX V4 Скачать руководство пользователя страница 24

Functions 

i-modul ISDN HIX V4 

 

6.2.2

 

Disabling an Automatic Call 

If the function "automatic call" is enabled, the i-modul ISDN HIX V4 does not 
accept AT commands anymore. To be able to configure the i-modul ISDN HIX V4 
again, you must disable the function. 

 

To change the i-modul ISDN HIX V4 to configuration mode with enabled 

function "automatic call" 

 

The function "automatic call" is active. 

 

Your terminal program is connected to the i-modul ISDN HIX V4. 

 

The serial interface speed is configured to 9600 bps. 

1.

 

Perform a reset of the i-modul ISDN HIX V4. 

2.

 

The terminal program displays the message 
"+++ press <CR>, <CR>, <ESC>,<ESC> to enter TA+Configurator 
+++". 

 

This message does not appear if it is disabled by the command 

AT**RSTMSG=0

. 

3.

 

Quickly double-press the "Enter" key and the "ESC" key. 

 

You are in the TA+Configurator and can configure the i-modul ISDN 
HIX V4 with the dedicated TA+Configurator commands again. 

4.

 

Enter 

cmds=0 

, to disable the "automatic call" function. 

5.

 

Save the settings (if desired) with the command 

save.

 

6.

 

Exit the remote configuration with the command 

go

. 

 

24 

 

Содержание i-modul ISDN HIX V4













































































Отзывы:

Нет отзывов