insys icom i-modul 144/56k, Руководство дизайнера, Страница: 43 / 63

i-modul Modem 144/56k AT Command Reference
Command Description
ATZ<n>
Software reset
The command causes the i-modul Modem 144/56k 3.0 basic to perform a soft-
ware reset. The i-modul Modem 144/56k 3.0 basic loads (depending on parame-
ter) the default setting saved by the user. If no parameter is specified, the user
default 0 is loaded.
ATZ0
Software reset; afterwards the user default 0 is loaded.
ATZ1
Software reset; afterwards the user default 1 is loaded.
AT&Z<n>
Saving telephone numbers
The command saves four entries permanently in the EEPROM. Each entry may
consist of up to 35 characters. The entries may be overwritten and must comply
with the dialing string as described in the
ATD
command.
AT&Z<n>=xxx n
Is the number of the entry in the list (from 0 to 3).
xxx
Is the dialling string with the phone number.
<Pause>
+++
<Pause>
Changing from data mode to command mode (online command mode)
1 second pause before and after the entry, no Carriage Return -
<CR>
-. After the
response "
OK
", an additional waiting period of 1 seconds for the re-entry of
AT
commands must be observed.
8.2 AT Messages
List of message numbers and messages texts depending on the
ATX
com-
mand.
Message no.
short form
Message text in long form ATX<0> ATX<1> ATX<2> ATX<3> ATX<4>
+F4 +FCERROR X X X X X
0 OK X X X X X
1 CONNECT X X X X X
2 RING X X X X X
3 NO CARRIER X X X X X
4 ERROR X X X X X
5 CONNECT 1200 1 X X X X
6 NO DIAL TONE 3 3 X 3 X
7 BUSY 3 3 3 X X
8 NO ANSWER 1 X X X X
9 CONNECT 600 1 X X X X
10 CONNECT 2400 1 X X X X
11 CONNECT 4800 1 X X X X
12 CONNECT 9600 1 X X X X
13 CONNECT 7200 1 X X X X
14 CONNECT 12000 1 X X X X
43