Functions
INSYS GSM 4.3
12.23
Configure Remote Configuration via SMS
You are able to send the extended INSYS AT** commands to the INSYS GSM 4.3
via SMS as well.
The commands sent via SMS will be executed as soon as the INSYS GSM 4.3 is in
command mode.
If selective call acceptance is enabled, commands, which are sent
from mobile phones with a phone number, which is not entered in the
CLIP list, are rejected.
Configuration with HSComm
In order to enable the remote configuration via SMS, activate on the
“Basic Settings” tab on the “GSM Connection” panel the check box
“automatic SMS processing”.
You can configure a password, which is queried after changing into re-
mote configuration mode. In order to enable the password, click on the
“Access Control” tab on the “Password for” panel on the “set password”
button under “remote configuration, control by SMS”. Enter the pass-
word into the “new Password:” field and again in the “confirm Pass-
word:” field and click the “OK” button.
In order to change the password, click on the “Access Control” tab on
the “Password for” panel on the “set password” button under “remote
configuration, control by SMS”. Enter the old password into the “old
Password:” field and the new password into the “new Password:” field
and again in the “confirm Password:” field and click the “OK” button. If
you do not enter a new password, the password will be disabled.
Configuration with AT commands
In order to enable automatic SMS process-
ing, use the command
AT**SMSRX=1
In order to enable automatic SMS process-
ing and keep SMS not intended for the IN-
SYS GSM 4.3 in the memory, use the
command
AT**SMSRX=2
In order to disable automatic SMS process-
ing, use the command
AT**SMSRX=0
In order to set the password, use the com-
mand
Replace
<newPW>
with the password and
with the repetition of the password.
AT**PASSC=<newPW>,<new
PW>
76