insys icom GSM 4.3 compact Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 94

insys icom GSM 4.3 compact Скачать руководство пользователя страница 73

INSYS GSM 4.3

Functions

12.22

Remote Configuration of the INSYS GSM 4.3

In order to configure the INSYS GSM 4.3 remotely, a data connection with the IN-
SYS GSM 4.3 to be configured must be established. This can be achieved by a call
with any modem at the INSYS GSM 4.3. After changing into remote configuration
mode, AT commands for configuring the INSYS GSM 4.3 can be transmitted.

A data connection between the modem and the INSYS GSM 4.3 must exist to
change into remote configuration mode. A dedicated connection type is not re-
quired. We recommend using only error corrected connections for remote configu-
ration to avoid transmission failures with the AT commands.

Configuration with HSComm

In order to enable the remote configuration, activate on the “Basic Set-
tings” tab on the “GSM Connection” panel the check box “auto answer”.

You can configure a password, which is queried after changing into re-
mote configuration mode. In order to enable the password, click on the
“Access Control” tab on the “Password for” panel the “set password”
button under “remote configuration, control by SMS”. Enter the pass-
word into the “new Password:” field and again in the “confirm Pass-
word:” field and click the “OK” button.

In order to change the password, click on the “Access Control” tab on
the “Password for” panel the “set password” button under “remote con-
figuration, control by SMS”. Enter the old password into the “old Pass-
word:” field and the new password into the “new Password:” field and
again in the “confirm Password:” field and click the “OK” button. If you
do not enter a new password, the password will be disabled.

The selective call acceptance function allows for restricting the access to
the INSYS GSM 4.3 for dedicated phone numbers.

Configuration with AT commands

In order to enable the remote configuration,
the automatic call acceptance (after 2 ring
tones for example) must e enabled.

ATS0=2

In order to set the password, use the com-
mand

Replace

<newPW>

with the password and

with the repetition of the password.

AT**PASSC=<newPW>,<new
PW>

73

«
...
71
72
73
74
75
...
»

Содержание GSM 4.3 compact































































































Отзывы:

Нет отзывов