Mounting
INSYS GSM 4.3
9
Mounting
This section describes how to mount the INSYS GSM 4.3 to a DIN rail, con-
nect the power supply and uninstall it again. Observe the instructions in the
"Safety" section of this manual, in particular the "Safety Instructions for Elec-
trical Installation" for that purpose unconditionally.
Caution!
Moisture and liquids from the environment may seep into
the interior of the INSYS GSM 4.3!
Fire hazard and damage of the product.
The INSYS GSM 4.3 must not be used in wet or damp envi-
ronments, or in the direct vicinity of water. Install the IN-
SYS GSM 4.3 at a dry location, protected from water spray.
Disconnect the power supply before you perform any work
on a INSYS GSM 4.3 which may have been in contact with
moisture.
Caution!
The device could be destroyed if the wrong power supply is
used!
If the INSYS GSM 4.3 is operated with a power supply that
supplies a voltage exceeding the permissible operating
voltage of the INSYS GSM 4.3, the device will be de-
stroyed.
Make sure that you use the suitable power supply. Refer to
the Technical Data section for the proper voltage range of
the INSYS GSM 4.3.
30