insys icom GPRS 5.1 Скачать руководство пользователя страница 91

Страница: 91 / 102

INSYS GPRS 5.1 serial

FAQ

Problem:

Possible cause:

Remedy

The manual selection of

ATD<ip>:<port>

ATD<domain>:<port>

is not possible. After a few
seconds, the messages

Carrier

No Dialtone

are displayed.

The GPRS dial-in parame-
ters have not been set cor-
rectly.

Step 1:

Read out all data using the button “Read
settings” from the device and check the
settings.

Step 2:

On the tab "TCP transparent" check the
selection of the network provider.

For some network providers, PAP authen-
tication is required.

Please find a selection of network provid-
ers for German speaking countries (Ger-
many, Austria, Switzerland) in Chapter 11
“GPS Dial-in Parameters” or ask the cus-
tomer center of your provider for the cor-
rect settings.

Step 3:

Change the settings, if necessary and
restart the INSYS GPRS 5.1 serial.

Step 4:

Switch to the terminal program

and manually dial into the GPRS network.
Enter the

command

ATD*99***1#

The successful connection setup is con-
firmed with the message

Connect

Содержание GPRS 5.1







































































































Результаты поиска

Содержание GPRS 5.1

Отзывы:

insys icom GPRS 5.1, Руководство пользователя, Страница: 91 / 102

Результаты поиска

Содержание GPRS 5.1

Отзывы: