insys icom GPRS 5.1, Руководство пользователя, Страница: 49 / 102

INSYS GPRS 5.1 serial Functions
49
In a second step, the IP target for the callback must be entered.
Afterwards, the automatic call acceptance after 2 ring tones is required.
Alternatively, our example can be set using the terminal program:
In general, activate selective call acceptance
Enter allowed phone number 1
Enter allowed phone number 2
AT**CLIP=1
AT**CLIP1=
+494989949494.
AT**CLIP2=
+491711253456
Store destination IP for callback
Store destination TCP port for callback
AT**AUTOIP=
200.12.0.120
AT**AUTOPORTIP=
10000
Store callback settings AT**CALLBACK=
0,2,0

No callback action for call from phone num-
ber 1

IP callback for call from phone number 2

No callback action for call from phone num-
ber 3
Save the extended functions
Automatic acceptance of an incoming CSD call
(for the call of a service center modem)
Save setting for
ATS0
Perform RESET, accept all parameters
AT**SAVE
ATS0=2
AT&W
AT**RESET