manualshive.com logo in svg

insys icom GPRS 5.1, Руководство пользователя, Страница: 37 / 102

Поделиться
Скачать
insys icom GPRS 5.1 Скачать руководство пользователя страница 37

INSYS GPRS 5.1 serial 

Connection 

 

 

37 

that it can not be determined if the remote terminal has disappeared without 
properly terminating the connection (e.g. due to a failure of the radio network or a 
failure of the remote terminal). 
It can also occur that GPRS network providers terminate connections themselves 
to be able to offer the resources to other participants, if there is no data transfer 
for an extended period of time. 

For these cases, TCP offers a suitable accessory by sending Keep Alive messages. 
The period between two monitoring packets can be set to 1 minute steps (or be 
turned off completely).  

 

If three successive monitoring packets are not responded to, the connection is re-
garded as terminated, and the INSYS GPRS 5.1 serial returns to offline mode. If the 
device is configured as a leased line device, the connection will then be re-
established. 
Keep Alive will mostly be used for leased lines, because the application on location 
is usually not able to assume the connection control and monitoring. 

Alternatively, the settings can be entered or modified using the terminal pro-
gram. 

TCP Keep Alive Timer is set to 10 minutes 

AT**KEEP=10

 

Save changes 

AT**SAVE

 

Changes take effect with a restart of the de-
vice 

AT**RESET

 

 

 

Note 

 
Keep Alive creates traffic, as each Keep Alive packet is in principle 
an empty TCP/IP message which must be confirmed by the remote 
terminal. For a Keep Alive, two empty TCP/IP messages with 40 byte 
each are sent.  
When selection the TCP aggregation timeouts, the rate and the bill-
ing type in your GPRS agreement must be considered as well. 
See also Chapter 8.8 

5.2.8.2

 

Forming data packets 

For a TCP/IP-based transmission such as the 
“TCP transparent” connection, the transmit-
ted amount of data consists not only of the 
sum of all user data of the application and 
the required TCP/IP headers. 

 

Each TCP/IP message has a protocol over-
head of 40 bytes. For each message there is 
also a confirmation message from the re-
mote terminal with 40 bytes as well. 

 

 

Содержание GPRS 5.1







































































































Отзывы:

Нет отзывов