manualshive.com logo in svg

insys icom GPRS 5.1, Руководство пользователя, Страница: 15 / 102

Поделиться
Скачать
insys icom GPRS 5.1 Скачать руководство пользователя страница 15

INSYS GPRS 5.1 serial 

Mounting 

 

 

15 

4.5

 

Initial Operation 

4.5.1

 

Installation 

This section applies only to the initial startup of the device with factory settings. 

 

1.

 

Have the SIM card and the according PIN ready. 

2.

 

Install the device on a DIN rail. 

3.

 

Connect the power supply. 

 

First, connect the ground connection. 

4.

 

Connect a suitable power supply (10..60V DC). 

 

Note: The minimum supply voltage value is 10V DC. The maxi-
mum supply voltage value is 60V DC. 

5.

 

Connect the antenna. 

 

Use a suitable GSM antenna. 

 

You can obtain suitable GSM antennas as accessories for this 
device from INSYS. 

6.

 

Switch the power supply on. 

 

The power LED will light up. 

7.

 

Wait until the device has powered up. 

 

The status LED blinks during the boot process. 

 

The signal LED blinks when the process is completed. 

8.

 

Connect the device to the PC. 

 

Connect the 9-pin jack at the device with the serial interface of 
your computer. 

Содержание GPRS 5.1







































































































Отзывы:

Нет отзывов