EBW-E100
Functions
69
12.4.2
Configuring E-Mail Dispatch
The EBW-E100 can send an e-mail to any recipient on different, pre-defined events.
An attachment, which can be selected from different log files, can be attached to
every e-mail. Moreover, it is possible to attach the status page of the web interface
to the message text. It is possible to create and manage a series of different
combinations of recipient, event, attachment, and text.
Sending an e-mail is only possible if the access data for the e-mail account are
entered correctly in the menu "Messages" on the page "Configuration".
Configuration via web interface (menu "Messages", page "E-mail")
In order to enable e-mail dispatch, check the checkbox "Activate e-mail
messages".
In order to create an e-mail message, you have to define this in the
section "Create new e-mail". Enter the e-mail address of the recipient
into the field "Recipient" for this. Select from the drop-down list "Event"
the respective event for triggering the e-mail dispatch. Select from the
drop-down list "Attachment" the respective log file to be attached to the
e-mail. If this file is not present on the EBW-E100, the e-mail will be sent
without attachment. Check the checkbox "Attach current status to
message text", if the status page of the web interface is to be attached to
the message text. Enter the message text into the field "Text".
Save your settings by clicking "OK".
In order to temporarily switch off e-mail messages, uncheck in the
section "Existing e-mails" the check box in the column "active" in the e-
mail message overview. Click on "OK" to confirm the settings.
In order to delete one or more e-mail messages, check in the section
"Existing e-mails" the check box in the column "delete" in the e-mail
message overview. Click on "OK" to confirm the settings.
