EBW-E100
Functions
35
12
Functions
12.1
Basic Settings
12.1.1
Configuring Web Interface Access
The web interface is used to configure the EBW-E100. It will be protected against
unauthorised access by requesting user name and password (alternatively also via
a Radius server). The web interface can be configured for a configuration from a
computer in the internal network or for remote configuration from the WAN via the
HTTP or HTTPS protocol. A location can be entered for a better differentiation. You
can specify the port, under which the web interface can be accessed.
Configuration via web interface (menu "Basic Settings", page "Web interface")
For a local authentication at the device, select the radio button
"Authentication with password" and enter the access data into the
respective fields.
For an authentication at the Radius server, select the radio button
"Authentication at Radius server“.
The Radius server must be configured for this (in the "Basic Settings"
menu on the "Radius" page).
In order to specify the access options (local or remote via HTTP or
HTTPS) that are permitted for the configuration, check or uncheck the
respective checkboxes.
The web interface port is defined in the entry field "Port for HTTP web
interface" or "Port for HTTPS web interface". Port 80 (HTTP) or port 443
(HTTPS) is configured for the web interface by default.
A description or location of the router may be entered in the entry field
"Location". This description appears in the browser window title as well
as the start page of the web interface then and facilitates a differentiation
if more web interface windows are open.
Save your settings by clicking "OK".
